Last Active: Oct 26, 2024
Threads: 615
Posts: 7,941
Reputation:
86
I'm planning to add another PCI network adaptor to one of my computers: one on the router that connects all other computers on the Internet, and one new one which I am going to connect a crossover cable to a PS2 so the PS2 can access games stored and shared from the PC.
Can I do this without trouble?
Last Active: Oct 17, 2024
Threads: 226
Posts: 6,322
Reputation:
26
I can't tell about "without trouble" but it's perfectly doable, in theory.
- PC slots are made to accept anything, from floppy disk controllers to a "complete computer in a daughter board".
- Many servers (and home made look-alikes) have multiple network cards, operating on same or completely different protocols. You'll find professional grade adapters with multiple ports, built-in switching/routing, etc.
- Windows classify your plain basic PC's network card as many: Ethernet, IP, etc. Those virtual adapters are drivers/interfaces to your real single card.
I've seen it (1 PC, 2 LAN) running on some occasions, but it was a long time ago, when still working in the IT field.
Last Active: Oct 26, 2024
Threads: 615
Posts: 7,941
Reputation:
86
"Not without trouble?" Then "perfectly doable?" dueda, you like to contradict yourself! Just kidding.
Well, the only way to know is to test it.
I'll let you know if I run into errors.
While we're at it, if you can solve this Rosetta Stone for me: can a slim PS2 use wireless connections?
Last Active: Oct 03, 2024
Threads: 67
Posts: 6,381
Yes, but you can also connect your PS2 to the router and achieve the same thing. You also don't need a crossover cable unless both devices are very old.
Last Active: Oct 26, 2024
Threads: 615
Posts: 7,941
Reputation:
86
I would need a crossover cable because the router is full of Ethernet connections.
Last Active: Oct 03, 2024
Threads: 67
Posts: 6,381
So, rather than a new network card, what you need is an additional switch. But you still don't need a crossover cable. Newer adapters handle that automatically.
Last Active: Oct 26, 2024
Threads: 615
Posts: 7,941
Reputation:
86
Sep 05, 2020, 13:26 pm
(This post was last modified: Sep 05, 2020, 15:33 pm by RobertX. Edited 2 times in total.)
All right, thank you.
EDIT: Just so I know, the switch should connect itself to the already-operating router, correct?
EDIT: OK, I'm going to go out and buy a router. I am doing so because of IP addresses. Routers can do DHCP and thus, that is why I'm doing it.
Thanks!
Last Active: Sep 13, 2024
Threads: 18
Posts: 685
Reputation:
4
You can have as many network cards as you have PCI(-e) slots
Last Active: Oct 26, 2024
Threads: 615
Posts: 7,941
Reputation:
86
Maybe this is off-topic, but I want to get this off my chest: can a router still assign dynamic IP addresses (DHCP) if it's not connected a modem?
Last Active: Oct 03, 2024
Threads: 67
Posts: 6,381
It is off topic, but yes, a DHCP service is independent of any other network operations.
|