Last Active: Mar 01, 2014
Threads: 0
Posts: 5
Reputation:
0
(Feb 27, 2014, 08:41 am)times2fxp Wrote: If running under 64 bit, when you install it, be sure to right click the setup file and choose compatibility and choose windows xp service pack 2. I found that cures the problem. So you will need to reinstall it on that computer.
I think I fixed it! PC number 2 had malfunctioned because I had deleted the C:\ProgramData\FLEXnet folder while AD was running. A reinstall made it work. Now for the interesting part. PC number 1 that never worked right, never installed the ISUSPM.exe file in the FLEXnet\Connect\11 folder. I copied it from PC number 2 and BAM it works!
Last Active: May 18, 2014
Threads: 2
Posts: 11
Reputation:
0
Thanks, guys, for helping each other out. I personally have not completed the Main set yet, so I would have been unable to answer your questions. Glad you guys figured it out.
Here's something I sent in a PM reply to another question that might help you or others with slow downloading or inaccurate speed readings:
I'm not sure why my torrents are moving slower than the originals... if they are at all. My torrents are clones of the original torrents with a few additional trackers added. By all logic they should be faster if anything, but you are not the first to say they are moving slow.
I did notice that a few seeds are sending bad data that ends up being discarded and therefore wasting bandwidth. If you have a torrent client that allows you to see Discarded or Canceled data blocks, disallow that peer from sending you data. This will allow you to actually pull down more good data and less garbage.
Last Active: Mar 01, 2014
Threads: 0
Posts: 5
Reputation:
0
(Feb 28, 2014, 18:10 pm)XSienar Wrote: Thanks, guys, for helping each other out. I personally have not completed the Main set yet, so I would have been unable to answer your questions. Glad you guys figured it out.
I have made a mistake. I will explain. The 10.53 image installs all data but not FLEXnet connect. The FLEXnet connect that I had was left over from my 10.40 installation. I tried installing on a virgin PC (never seen all data before) and once you install the crack, crashes with error 4502. On one PC with the 10.40 install, it worked. On another PC with 10.40, the 10.53 didn't work because I had taken out the FLEXnet folder in c:\programdata. Seems like the 10.53 image doesn't come with it anymore. Also, the included software update manager install/uninstall files do NOT install to the proper location, so all data still doesn't see FLEXnet. Short story long: install 10.40 then 10.53 then cracked 10.52
Last Active: May 18, 2014
Threads: 2
Posts: 11
Reputation:
0
Mar 02, 2014, 11:02 am
(This post was last modified: Mar 02, 2014, 12:09 pm by XSienar. Edited 1 time in total.)
I uploaded the FLEXnet files from the 10.40 disc I found. The torrent to download them is here: FLEXnet for AllData 10.53 hacks
Thanks again to trent for finding the problem and solution.
Last Active: Mar 03, 2014
Threads: 0
Posts: 1
Reputation:
0
(Feb 16, 2014, 08:16 am)XSienar Wrote: ---original torrent removed--- see below for new torrent ---
Quote:AllData 10.53 (Q3 2013)
This is the FINAL DVD Edition of AllData. After this was produced, AllData switched to online only.
From http://support.alldata.com/alldata-repair-dvd
"IMPORTANT - Due to the small number of customers using DVDs and the rapid growth of the data, the last shipment of DATA discs was shipped in August/September 2013."
-------------------------------------------------------------------------------------
THIS TORRENT ONLY CONTAINS OTHER TORRENTS, MAGNET LINKS, AND DETAILED CONTENTS LIST.
ORIGINAL TORRENTS ARE HOSTED BY http://rutracker.org
YOU MUST BE A REGISTERED MEMBER TO DOWNLOAD THE TORRENTS FROM THERE, SO I AM UPLOADING THE TORRENTS HERE FOR PEOPLE UNABLE TO READ/TRANSLATE RUSSIAN.
It currently shows 0 seeds, but I am seeding. Please post if you have any problems. This is my first torrent upload ever. (Kinda odd, huh? My "first ever" is also a "last ever".  )
cool thanks
Last Active: May 05, 2014
Threads: 0
Posts: 1
Reputation:
0
May 05, 2014, 00:59 am
(This post was last modified: May 05, 2014, 01:00 am by Soeasytobefake. Edited 1 time in total.)
Maybe one of you guys can help me out with this issue. Ive racked my Brain, the internet, and my computer.... I'm totally lost.
I have two separate HD's in one computer. One with Windows 7 and a previous version of alldata installed version 10.0 I believe. The other HD with Windows 8.1 installed clean, no other programs (ive been trialing 8.1).
On the Win7 Drive I installed Alldata 10.53 and the crack, and was confronted with the 4502 code. I tried extracting the Flexnet files that were put up, but no avail. Trying to open the software manager would bring up a box that says "Page Not found". I didn't spend too much time screwing with it.
I then installed Alldata on the Win8.1 Drive. I copied and pasted the flexnet files into the programdata folder (although they were already there, and i mean all of them), and the crack into the alldata directory, and BAM it worked no problem. I was even able to open the Software manager and set the update features to manual. I uninstalled alldata, and the deleted the flexnet folder so i could try a few different configurations. Bad move.... now the win8.1 drive wont run flexnet either. Same symptoms. Ive tried extracting the flexnet files, ive tried running the flexnet installer, re-installing alldata 10.53, and 10.40(not in that order). after I load the flexnet files into the program data folder and try to use the software manger i get two script errors.
when i open alldata i get the 4502 code.....
Any ideas?
Last Active: May 06, 2014
Threads: 0
Posts: 1
Reputation:
0
Im seeding but currently only at 35%... Going slow, I'll continue to seed this one for quite some time as it seems to be difficult to locate.
Last Active: May 23, 2014
Threads: 0
Posts: 1
Reputation:
0
just wanted to thank XSienar.
almost done install disc tor. was averaging around 500kb download. will continue to seed for a while.
Last Active: May 26, 2014
Threads: 0
Posts: 2
Reputation:
0
First of all I want to thank you for letting me download this awesome program, it works very well!(:
I'm curious of one thing though, I can not view TSBs is it just me or do we not have access to this information?
Ex: diagnosis and repair>engine, cooling and exhaust>engine>cylinder head assembly>all technical service bulletins, then if you click one a window says "If you have TSBs as a part of your current subscription, please make sure you have a data disc in the drive to access the full TSB. The parts and labor disc only contains TSB titles. (INFORMATION MESSAGE #1054)."
Last Active: Jun 22, 2014
Threads: 0
Posts: 1
Reputation:
0
May 10, 2014, 06:36 am
(This post was last modified: May 10, 2014, 06:39 am by vuhu. Edited 1 time in total.)
what is the total size of the download version 10.53 ?
|
