ToLiss A340-600

[Exhaust]

V1.0.3 Only fully working version XP11 only - https://drive.google.com/drive/folders/1...share_link

It loads Fine. Not completed a flight but on ground everything seems to load normal. FMGEC also working. No issue with SID/STAR etc.  Although I got two errors. 

1) One related to Sound which I solved by removing the fmod folder and renaming fmod1(included inside) to fmod.
2) I am still getting this error which is of C++ Runtime error which  I have to ignore every time. 

Will be back with a full flight and let you know.

I just made a flight on xp12, all fine

Nice :) I edited the description to include xp12

[MistVee]

i had 3 issues with it on my one and only test sector.. THe aircraft seemed hard to taxi on the ground. But then again it was pouring in the sim.. maybe that was why, i dont know if that is a thing in x plane 11 where the ground wetness make the plane understeer. and second issue, i had autopilot disconnect on me following some major turbulence. 3rd issue, the plane wouldnt climb as expected. i was doing 1000 ft per minute in vnav and 190 knts. i even switched cost index to 150 the aircraft would still not accelerate. However it works great and the systems are actually really good.. I would recommend the plane.

[UWK]

V1.0.3 Only fully working version XP11 only - https://drive.google.com/drive/folders/1...share_link

It loads Fine. Not completed a flight but on ground everything seems to load normal. FMGEC also working. No issue with SID/STAR etc.  Although I got two errors. 

1) One related to Sound which I solved by removing the fmod folder and renaming fmod1(included inside) to fmod.
2) I am still getting this error which is of C++ Runtime error which  I have to ignore every time. 

Will be back with a full flight and let you know.

I just made a flight on xp12, all fine

Nice  I edited the description to include xp12

Could you also do something about the C++ error on Xplane 12?

[Exhaust]

V1.0.3 Only fully working version XP11 only - https://drive.google.com/drive/folders/1...share_link

It loads Fine. Not completed a flight but on ground everything seems to load normal. FMGEC also working. No issue with SID/STAR etc.  Although I got two errors. 

1) One related to Sound which I solved by removing the fmod folder and renaming fmod1(included inside) to fmod.
2) I am still getting this error which is of C++ Runtime error which  I have to ignore every time. 

Will be back with a full flight and let you know.

I just made a flight on xp12, all fine

Nice  I edited the description to include xp12

Could you also do something about the C++ error on Xplane 12?

Sorry but I did not crack this aircraft so I am not sure how to fix that

---

i had 3 issues with it on my one and only test sector.. THe aircraft seemed hard to taxi on the ground. But then again it was pouring in the sim.. maybe that was why, i dont know if that is a thing in x plane 11 where the ground wetness make the plane understeer. and second issue, i had autopilot disconnect on me following some major turbulence. 3rd issue, the plane wouldnt climb as expected. i was doing 1000 ft per minute in vnav and 190 knts. i even switched cost index to 150 the aircraft would still not accelerate. However it works great and the systems are actually really good.. I would recommend the plane.

It is normal for the autopilot to disconnect in extreme turbulence if it can not maintain on the FD. For the 3rd issue, the climb performance can be affected by many things such as the speed, altitude/air density, Gross Weight of the aircraft and the overall engine power which in the A340 is not actually that strong despite it having 4 engines lol.

[Martian :)]

V1.0.3 Only fully working version XP11 only - https://drive.google.com/drive/folders/1...share_link

It loads Fine. Not completed a flight but on ground everything seems to load normal. FMGEC also working. No issue with SID/STAR etc.  Although I got two errors. 

1) One related to Sound which I solved by removing the fmod folder and renaming fmod1(included inside) to fmod.
2) I am still getting this error which is of C++ Runtime error which  I have to ignore every time. 

Will be back with a full flight and let you know.

I just made a flight on xp12, all fine

Nice  I edited the description to include xp12

Could you also do something about the C++ error on Xplane 12?

if you installed Visual C++ Redistributable, you won't get these warnings.
fmod sound pack can be solved by using other sound packs

[UWK]

It loads Fine. Not completed a flight but on ground everything seems to load normal. FMGEC also working. No issue with SID/STAR etc.  Although I got two errors. 

1) One related to Sound which I solved by removing the fmod folder and renaming fmod1(included inside) to fmod.
2) I am still getting this error which is of C++ Runtime error which  I have to ignore every time. 

Will be back with a full flight and let you know.

I just made a flight on xp12, all fine

Nice  I edited the description to include xp12

Could you also do something about the C++ error on Xplane 12?

if you installed Visual C++ Redistributable, you won't get these warnings.
fmod sound pack can be solved by using other sound packs

I have installed all the latest C++ Redistributables I do it every 4 months. And just for this I installed and repair all again. But same. I have searched the internet. It is related to XP11 Aircraft being run in XP12 without the compatibility patches/cracks etc.

If any other XP12 user is not getting this error then this issue might be only with me.

[tommasozane]

I just made a flight on xp12, all fine

Nice  I edited the description to include xp12

Could you also do something about the C++ error on Xplane 12?

if you installed Visual C++ Redistributable, you won't get these warnings.
fmod sound pack can be solved by using other sound packs

I have installed all the latest C++ Redistributables I do it every 4 months. And just for this I installed and repair all again. But same. I have searched the internet. It is related to XP11 Aircraft being run in XP12 without the compatibility patches/cracks etc.

If any other XP12 user is not getting this error then this issue might be only with me.

i use it on xp12 and works just fine, I also use the beta latest beta version of xp12 and works

[MistVee]

It loads Fine. Not completed a flight but on ground everything seems to load normal. FMGEC also working. No issue with SID/STAR etc.  Although I got two errors. 

1) One related to Sound which I solved by removing the fmod folder and renaming fmod1(included inside) to fmod.
2) I am still getting this error which is of C++ Runtime error which  I have to ignore every time. 

Will be back with a full flight and let you know.

I just made a flight on xp12, all fine

Nice  I edited the description to include xp12

Could you also do something about the C++ error on Xplane 12?

Sorry but I did not crack this aircraft so I am not sure how to fix that

---

i had 3 issues with it on my one and only test sector.. THe aircraft seemed hard to taxi on the ground. But then again it was pouring in the sim.. maybe that was why, i dont know if that is a thing in x plane 11 where the ground wetness make the plane understeer. and second issue, i had autopilot disconnect on me following some major turbulence. 3rd issue, the plane wouldnt climb as expected. i was doing 1000 ft per minute in vnav and 190 knts. i even switched cost index to 150 the aircraft would still not accelerate. However it works great and the systems are actually really good.. I would recommend the plane.

It is normal for the autopilot to disconnect in extreme turbulence if it can not maintain on the FD. For the 3rd issue, the climb performance can be affected by many things such as the speed, altitude/air density, Gross Weight of the aircraft and the overall engine power which in the A340 is not actually that strong despite it having 4 engines lol.

Yes. Ive only done one flight with it but i am quite baffled about how the engines are really that low on power. I wasnt really heavy, probably 50% loaded. I have to get used to it well before taking this one on vatsim.

[UWK]

Nice  I edited the description to include xp12

Could you also do something about the C++ error on Xplane 12?

if you installed Visual C++ Redistributable, you won't get these warnings.
fmod sound pack can be solved by using other sound packs

I have installed all the latest C++ Redistributables I do it every 4 months. And just for this I installed and repair all again. But same. I have searched the internet. It is related to XP11 Aircraft being run in XP12 without the compatibility patches/cracks etc.

If any other XP12 user is not getting this error then this issue might be only with me.

i use it on xp12 and works just fine, I also use the beta latest beta version of xp12 and works

 Have you enabled "zink" plugin in your xplane 12 graphics settings. Can you try with zink enabled?

[frabarba]

I bought it before i knew the existence of suprbay, if i share the file you can use it?