FENIX A319 - A320 A321

[luisxv2k]

https://modsfire.com/d2fv62J36GD4J34
this is half a crack, you get a319 and a321 cabin, model and sounds but the systems will remain those of the a320 this is the only crack available currently

Installation steps :
1) move the folders from the community folder contained in the crack to the community folder of the sim (the a320 and the expansion)
2) move FenixSim A320 folder to C:\Program Files
3) when you launch the a319 or the a321, go to C:\Program Files\FenixSim A320\deps and run FenixDisplay.exe, FenixSystem.exe and FenixCDU this only applies when you fly an exapansion aircraft, in the a320 they start automatically

hacker4world , Thanks for while!

[Rond7]

https://modsfire.com/d2fv62J36GD4J34
this is half a crack, you get a319 and a321 cabin, model and sounds but the systems will remain those of the a320 this is the only crack available currently

Installation steps :
1) move the folders from the community folder contained in the crack to the community folder of the sim (the a320 and the expansion)
2) move FenixSim A320 folder to C:\Program Files
3) when you launch the a319 or the a321, go to C:\Program Files\FenixSim A320\deps and run FenixDisplay.exe, FenixSystem.exe and FenixCDU this only applies when you fly an exapansion aircraft, in the a320 they start automatically

I followed the instructions... However, the screens are all black, as if they were turned off. Only the tablet is on and functional.
What am I doing wrong? I even ran the programs in the Fenix folder in the correct order.

[hacker4world]

https://modsfire.com/d2fv62J36GD4J34
this is half a crack, you get a319 and a321 cabin, model and sounds but the systems will remain those of the a320 this is the only crack available currently

Installation steps :
1) move the folders from the community folder contained in the crack to the community folder of the sim (the a320 and the expansion)
2) move FenixSim A320 folder to C:\Program Files
3) when you launch the a319 or the a321, go to C:\Program Files\FenixSim A320\deps and run FenixDisplay.exe, FenixSystem.exe and FenixCDU this only applies when you fly an exapansion aircraft, in the a320 they start automatically

I followed the instructions... However, the screens are all black, as if they were turned off. Only the tablet is on and functional.
What am I doing wrong? I even ran the programs in the Fenix folder in the correct order.

Sorry for the inconvenience, did you run the main fenix launcher? I forgot to mention it in my post
If you did not then launch it alongside the others and restart the flight. 
If you did in fact launch it and still did not work, launch the a320 (it should be working fine) and use the developer mode to switch to the a319 or a321 and it will work
If the a320 also did not work then you have made a mistake following the instructions

[Irineu]

https://modsfire.com/d2fv62J36GD4J34
this is half a crack, you get a319 and a321 cabin, model and sounds but the systems will remain those of the a320 this is the only crack available currently

Installation steps :
1) move the folders from the community folder contained in the crack to the community folder of the sim (the a320 and the expansion)
2) move FenixSim A320 folder to C:\Program Files
3) when you launch the a319 or the a321, go to C:\Program Files\FenixSim A320\deps and run FenixDisplay.exe, FenixSystem.exe and FenixCDU this only applies when you fly an exapansion aircraft, in the a320 they start automatically

I followed the instructions... However, the screens are all black, as if they were turned off. Only the tablet is on and functional.
What am I doing wrong? I even ran the programs in the Fenix folder in the correct order.

Sorry for the inconvenience, did you run the main fenix launcher? I forgot to mention it in my post
If you did not then launch it alongside the others and restart the flight. 
If you did in fact launch it and still did not work, launch the a320 (it should be working fine) and use the developer mode to switch to the a319 or a321 and it will work
If the a320 also did not work then you have made a mistake following the instructions

( hacker4world ) Sorry for bothering you everything is working thank you very much

[Rond7]

https://modsfire.com/d2fv62J36GD4J34
this is half a crack, you get a319 and a321 cabin, model and sounds but the systems will remain those of the a320 this is the only crack available currently

Installation steps :
1) move the folders from the community folder contained in the crack to the community folder of the sim (the a320 and the expansion)
2) move FenixSim A320 folder to C:\Program Files
3) when you launch the a319 or the a321, go to C:\Program Files\FenixSim A320\deps and run FenixDisplay.exe, FenixSystem.exe and FenixCDU this only applies when you fly an exapansion aircraft, in the a320 they start automatically

I followed the instructions... However, the screens are all black, as if they were turned off. Only the tablet is on and functional.
What am I doing wrong? I even ran the programs in the Fenix folder in the correct order.

Sorry for the inconvenience, did you run the main fenix launcher? I forgot to mention it in my post
If you did not then launch it alongside the others and restart the flight. 
If you did in fact launch it and still did not work, launch the a320 (it should be working fine) and use the developer mode to switch to the a319 or a321 and it will work
If the a320 also did not work then you have made a mistake following the instructions

Greetings, my friend! I followed the instructions and it worked, I am very grateful for the help, I did this:

1 - I selected the aircraft.
2 - I opened FenixSim A320.
3 - While it was loading, I was already running FenixCDU; FenixDisplay and FenixSystem!

>> The first time it didn't work, so I restarted just repeating and it worked, then I was able to close FenixSim A320 and use it normally.


Thank you very much! 

[hacker4world]

https://modsfire.com/d2fv62J36GD4J34
this is half a crack, you get a319 and a321 cabin, model and sounds but the systems will remain those of the a320 this is the only crack available currently

Installation steps :
1) move the folders from the community folder contained in the crack to the community folder of the sim (the a320 and the expansion)
2) move FenixSim A320 folder to C:\Program Files
3) when you launch the a319 or the a321, go to C:\Program Files\FenixSim A320\deps and run FenixDisplay.exe, FenixSystem.exe and FenixCDU this only applies when you fly an exapansion aircraft, in the a320 they start automatically

I followed the instructions... However, the screens are all black, as if they were turned off. Only the tablet is on and functional.
What am I doing wrong? I even ran the programs in the Fenix folder in the correct order.

Sorry for the inconvenience, did you run the main fenix launcher? I forgot to mention it in my post
If you did not then launch it alongside the others and restart the flight. 
If you did in fact launch it and still did not work, launch the a320 (it should be working fine) and use the developer mode to switch to the a319 or a321 and it will work
If the a320 also did not work then you have made a mistake following the instructions

Greetings, my friend! I followed the instructions and it worked, I am very grateful for the help, I did this:

1 - I selected the aircraft.
2 - I opened FenixSim A320.
3 - While it was loading, I was already running FenixCDU; FenixDisplay and FenixSystem!

>> The first time it didn't work, so I restarted just repeating and it worked, then I was able to close FenixSim A320 and use it normally.


Thank you very much! 

My pleasure helping the community

[Probel]

https://modsfire.com/d2fv62J36GD4J34
this is half a crack, you get a319 and a321 cabin, model and sounds but the systems will remain those of the a320 this is the only crack available currently

Installation steps :
1) move the folders from the community folder contained in the crack to the community folder of the sim (the a320 and the expansion)
2) move FenixSim A320 folder to C:\Program Files
3) when you launch the a319 or the a321, go to C:\Program Files\FenixSim A320\deps and run FenixDisplay.exe, FenixSystem.exe and FenixCDU this only applies when you fly an exapansion aircraft, in the a320 they start automatically

The aircraft starts and works but some sounds are missing, do you know how to fix it?

[Irineu]

https://modsfire.com/d2fv62J36GD4J34
this is half a crack, you get a319 and a321 cabin, model and sounds but the systems will remain those of the a320 this is the only crack available currently

Installation steps :
1) move the folders from the community folder contained in the crack to the community folder of the sim (the a320 and the expansion)
2) move FenixSim A320 folder to C:\Program Files
3) when you launch the a319 or the a321, go to C:\Program Files\FenixSim A320\deps and run FenixDisplay.exe, FenixSystem.exe and FenixCDU this only applies when you fly an exapansion aircraft, in the a320 they start automatically

The aircraft starts and works but some sounds are missing, do you know how to fix it?

When you load the aircraft at the gate, you run the above files only.

3) when launching the a319 or a321, go to C:\Program Files\FenixSim A320\deps and run FenixDisplay.exe, FenixSystem.exe and FenixCDU this only applies when flying an expansion aircraft, on the a320 they start up

credits ( hacker4world )

[7wyvern]

a320 does not start with any panels active. any help? i have my game not on C drive but i only have a program files folder in C. does this have anything to do with it, though you stated the base a320 doesnt need the 4 exe's running?

https://imgur.com/a/WnUk8GC

pic of the issue. fenix app is running, but the dash stays black even after restarting mid flight and quitting and reopening.

what does it look like when you start the cdu, display and system exe's? it doesnt do anything for me, no popups or anything. only the fenix.exe will open a window.

[pastu1993]

a320 does not start with any panels active. any help? i have my game not on C drive but i only have a program files folder in C. does this have anything to do with it, though you stated the base a320 doesnt need the 4 exe's running?

https://imgur.com/a/WnUk8GC

pic of the issue. fenix app is running, but the dash stays black even after restarting mid flight and quitting and reopening.

Did you follow the installation instructions, as well as the instructions for starting the systems?
You have to start the following .exe files manually on A319 and A321
FenixCDU
FenixDisplay
FenixSystem

If installed correctly, you will find these in the following directory:
C:\ProgramData\FenixSim A320\deps

Have fun